Wiring Diagram I Tried Up The Switch And. The switch is for working two room lights separately. Had a go at pulling the 4 wires out and wiring up.
The neutral from the source is spliced through to the switch box using the white wire and in this diagram the white wire is. Learn what a relay is how it works and why you should use one. The common is for the live wire that supplies the input voltage to the switch.
By looking at the moving 3 way switch above the hot black wire coming from the power source will always attach to the common screw on the 1st switch in the circuit.
Back up switch wiring. You will need to dismantle the motor to get to the centrifugal switch to confirm that is the fault and if so repair it. Had a go at pulling the 4 wires out and wiring up. The attached image is what i came up with and i thought using a 143 between the first light and the outletswitch box would make it so i did not need to run two separate 142 wires between them.